plate valve
英 [pleɪt vælv]
美 [pleɪt vælv]
盘阀，板式阀
双语例句
- Centrifugal saw plate valve The seat is pressed into the body cavity and can be removed by inserting a finger in the center of the seat and pulling outwards.
阀座压在阀腔内，可以用手指插入阀座中心往外拉将其拆卸。 - Without diversion hole adjustment plate valve regulating its flow characteristics than ordinary non-diversion plate valve hole.
不带导流孔调节的平板闸阀其对流量的调节特性优于普通不带导流孔的平板闸阀。 - Loosen and remove the diaphragm lock nut and lock washer, pressure plate and diaphragm from the valve stem.
松开和拆卸隔膜锁紧螺母和锁紧垫圈，从阀杆上往下压阀盘和隔膜。 - The utility model is composed of a handle, a pull rod, a barrel body, a piston, a bottom plate, an oil inlet valve, an oil outlet valve, etc.
本实用新型由手柄、拉杆、筒体、活塞、底板、进油阀、出油阀、等部件所构成。 - Handle assembly is removed by loosening bolt and pulling upward. Remove the two hold-down bolts and lift index plate from valve.
通过松懈螺栓并拔出方法拆卸手柄总成。拆卸两个紧固螺栓，提起阀门上的刻度板。 - Remove the cover plate of the relief valve by removing the four connecting screws.
通过拆卸四个连接螺丝来拆卸安全阀盖板。 - Remove the two hold-down bolts and lift index plate from valve.
拆卸两个紧固螺栓，提起阀门上的刻度板。 - Disconnect the hose from the bottom cover plate to the relief valve.
断开底部盖板到安全阀上的软管。 - The body markings are supplemented by an identification plate which, depending on valve type and size, is mounted in the most practicable position.
阀体标记通过一个标志牌来加以补充，阀门种类和通径不同，标志牌也有所不同，并安置在最适合的地方。 - Therefore, the base plate valve to improve more meaningful.
因此，座板阀改进的意义更大。 - Modification of Ring Plate Valve of Reciprocating Refrigeration Compressor by Nitrogen ion Implantation
全封闭活塞式制冷压缩机节能初探制冷机环状阀片的氮离子注入改性 - The plate efficiency of the directed floating valve trays was determined using air water CO 2 system. Both the hydrodynamics and plate efficiency were compared with type F1 floating valve trays.
应用空气－水－CO2物系，测定了导向浮阀塔板的效率，并与F1型浮阀塔板进行了比较。 - Development of duoble plug-in plate dust valve
烧结机双层插板式卸灰阀的研制 - He body and plate of 1800 combustion valve were successfully spray-welded without preheat by means of research of equipment, material and technology of plasma spray-welding.
通过对等离子喷焊设备、材料、工艺的研究，在不预热条件下，成功地喷焊了1800燃烧阀阀体、阀板。 - Dynamic Characteristics of Unsymmetrical Servo Hydro-cylinder Controlled by Four-sided Spool Valve Bead welding repair of under plate and Y-tube of spool valve in concrete convey-ing truck
四边阀控非对称液压缸的动态特性汽车起重机转台钢结构焊接变形的控制 - Sealing Problem of the Plate Flow Valve Used in a Briny Plunger Pump
海水柱塞泵平板式配流阀的密封问题 - A new structural self-elastic damping plate of the compressor plate valve was presented in this paper.
本文提出了一种新型结构压缩机网状阀缓冲片&自弹缓冲片。 - In order to study the dynamic character of the plate, the valve's movement was simplified to a elastic plate system according to movement and boundary condition of the plate, and it is solved by FEA.
为了研究阀片的动力特性，本文按照阀片的运动特征及其边界条件，将其简化为薄板振动力学系统，采用有限元法来求解。 - Parametrize design of the multiple and sealed plate valve
复合密封式平板闸阀的参数化设计 - Preliminary Experiment Study on Self-bonding Plywood Preparation of Lining Plate in Soft Sealing Gate Valve
无胶胶合板试验研究软密封衬胶闸板的研制 - The Calculation on the Circular Arm of the Valve Plate of the Plate valve with No Friction
无摩擦网状阀片环臂的计算 - The results indicate that a rotable plate valve with a novel structure, a secondary demountable mandrel and techniques of both scraping and coating of insulation and automatic weighing of propellant slurry to be loaded are adopted so that the design requirements for propellant loading can be met.
结果采用结构新颖的转板阀，二次装配式芯模，以及刮涂绝热层和自动称量浇注药量技术，使装药达到了设计要求。 - Application Study of the Siphon Filter With Press Plate Valve
虹吸式压板阀滤池的应用研究 - Preparation of Lining Plate in Soft Sealing Gate Valve
软密封衬胶闸板的研制 - Design and application on hydraulic operated plate type rotary valve
液动板式旋转阀的设计与应用 - Study on extract technique of Bletilla striata gum Preparation of Lining Plate in Soft Sealing Gate Valve
白及胶制备工艺研究软密封衬胶闸板的研制 - Analysis of sealed structure with double plate in wedge gate valve connected with embedded gear
嵌入式齿形连接楔式闸阀双闸板密封结构 - The stress of the inclined impaction of the valve plate against the valve seat is the reason of the rupture of the valve plate.
而阀片与阀座倾侧撞击应力较大，是阀片断裂破坏的主要原因。 - The results show that stress of the straight impaction of the valve plate against the lift limiter and the valve seat is lesser than the stress of the inclined impaction of the valve plate against the valve seat.
分析表明阀片与升程限制器及阀座正碰撞产生的冲击应力较小，不会造成阀片断裂破坏。